- 11 -
15.
TPS
Enter
Set Ign.
menu and move to
TPS
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to
confirm.
Enable/disable
TPS
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
16.
Set TPS close [0%]
(if TPS enabled)
TPS close position must be calibrated to ensure correct TPS operation!
Enter
Set Ign.
menu and move to
TPS close [0%]
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Leave throttle at close position and confirm calibrating with pressing
'
ENTER
'
, or exit
calibration with pressing
'
-
'
. Displayed number should be between 0 and 500.
17.
Set TPS open [100%]
(if TPS enabled)
TPS open position must be calibrated to ensure correct TPS operation!
Enter
Set Ign.
menu and move to
TPS open [100%]
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Move throttle to maximum open position and confirm calibrating with pressing
'
ENTER
'
,
or exit calibration with pressing
'
-
'
. Displayed number should be between 500 and 1010.
18.
TCT mode
Throttle Close spark Termination mode, reduces number of sparks (spark is active
every third revolution) above 8000rpm, when throttle is closed. TCT mode ensure better
engine cooling.
Enter
Set Ign.
menu and move to
TCT mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Enable, or disable
TCT mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
This setting is primarily for race use, for normal road use the recommended setting is
'DISABLED'.
If you getting errors on the rev counter then 'DISABLE' this setting.
19.
IGN. MAP SW
Enabling, or disabling ignition map switch, for changing ignition maps while riding.
Enter
Set Ign.
menu and move to
Ign. Map SW
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Enable or disable external switch with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
