- 3 -
Rev Limit
- rev limit
Static Angle
- static angle (pickup position)
Compensation
- signal delay compensation (from pickup to spark plug)
Power Jet s
- set power jets
TPS
- enable, or disable TPS
TPS close [0%]
- calibrating TPS close position
TPS open [100%]
- calibrating TPS open position
TCT mode
- reduced spark at high revs with closed throttle
Ign. Map SW
- activating/deactivating external switch for selecting ignition map
Trigger Mode
- select trigger mode for specific engine
Stop SW Mode
- stop switch mode
Tach Ratio
- tachometer output pulse ratio
Ignition Test
- ignition spark test
Exit
2.2.
SET PV PARAMETERS SUBMENU
Load PV Curve
- load (select) PV curve
Save PV Curve
- save new PV curve
Set PV Curve
- PV curve parameters submenu
Dev-
- deviation of PV position
Close Position
- max close PV position
Open Position
- max open PV position
PV Test
- PV position test
Power-up Test
- enable, or disable test cycle at power-up
PV Curve SW
- activating/deactivating external switch for selecting PV curve
Exit
3.
LOAD IGN. MAP
Enter
Set Ign.
menu and move to
Load Ign. Map
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
.
Select number of previously saved ignition curve, with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
4.
SAVE IGN. MAP
Enter
Set Ign.
menu and move to
Save Ign. Map
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
.
Select number to which you want to save your ignition curve, with pressing
'
+
'
, or
'
-
'
and
press
'
ENTER
'
to confirm.
