- 12 -
20.
Trigger Mode
Select trigger mode for specific engine.
Trigger Mode
'1' is for RS250 NF5 and NSR250 MC21
Trigger Mode
'2' is for RS250 NX5
Enter
Set Ign.
menu and move to
Trigger Mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Change
Trigger Mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
21.
Stop Switch Mode
It defines stop switch position for engine stop.
"
Low Level Stop
" ... engine stops at low level signal (when stop switch connected to
the ground).
"
High Level Stop
" ... engine stops at high level signal (when stop switch is opened).
Enter
Set Ign.
menu and move to
Stop SW Mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Change
Stop SW Mode
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
22.
Tach Ratio
Tachometer output pulse ratio can be set to 1, or 2 pulses per revolution.
Enter
Set Ign.
menu and move to
Tach Ratio
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Change
Tach Ratio
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
23.
Ignition Test
Spark execution test without running engine. Spark can be optically checked, with
removed spark plug connected to plug cup and to the ground.
Enter
Set Ign.
menu and move to
Ignition Test
with pressing
'
+
'
, or
'
-
'
. With pressing
'
ENTER
'
multiple sparks will occur, for about 1s separately on each cylinder.
24.
Load PV Curve
Enter
Set PV
menu and move to
Load PV Curve
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
.
Select number of previously saved ignition curve, with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
