- 10 -
14.
POWER JETS
Enter
Set Ign.
menu and move to
Power Jets
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
...you entered submenu
Power Jets
.
Submenu organisation:
Invert Polarity
- invert power jet operation (invert open/close)
set Power Jet 1
- activating/deactivating soft rev limit
set Power Jet 2
- activating/deactivating soft rev limit
Exit
- exit submenu
14.1. INVERT POLARITY of power jets
Enter
Power Jets
menu and move to
Invert Polarity
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Enable/disable
Invert Polarity
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
14.2. set Power Jet 1
(if TPS enabled)
Three duty cycle curves for different throttle positions can be programmed. Each curve
can be programmed in 8 rev points.
Enter
Power Jets
menu and move to
set Power Jet 1
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
...you entered submenu
set Power Jet 1
.
Submenu organisation:
Curve 0-33%
- duty cycle curve from 0 to 33% TPS
Curve 34-66%
- duty cycle curve from 34 to 66% TPS
Curve 67-100%
- duty cycle curve from 67 to 100% TPS
Exit
- exit submenu
14.3. Change PARAMETERS OF POWER JET CURVE POINT
Move to point you want to change, with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Change rev point with pressing
'
+
'
, or
'
-
'
(in 100 rpm steps) and press
'
ENTER
'
to
confirm.
Change duty cycle with pressing
'
+
'
, or
'
-
'
(in 1% steps) and press
'
ENTER
'
to confirm.
14.4. set Power Jet 2
Same as with
set Power Jet 1
.
