- 7 -
10.
QUICK SHIFT
Enter
Set Ign.
menu and move to
Quick Shift
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
...you entered submenu
Quick Shift
.
Submenu organisation:
Shift Kill Time
- basic kill time (at 12000rpm)
Smart Shift
- activating/deactivating automatic kill time for different revs
Exit
- exit submenu
10.1. SHIFT KILL TIME
Enter
Quich Shift
menu and move to
Shift Kill Time
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Set kill time with pressing
'
+
'
, or
'
-
'
(in 1ms steps) and press
'
ENTER
'
to confirm.
10.2. SMART SHIFT
Smart shift function automatically adjusts kill time for different revs. Shift kill time must
be always set, as basic kill time.
Enter
Quich Shift
menu and move to
Smart Shift
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Enable, or disable
Smart Shift
function with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to
confirm.
11.
REV LIMIT
Enter
Set Ign.
menu and move to
Rev Limit
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Set
Rev Limit
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
12.
STATIC ANGLE
Static angle is reference point for CDI unit. Correct static angle is very important for
correct ignition advance. If programmed static angle is not same as mechanical position
of pickup(trigger point), then ignition advance will not be correct. Too much difference
will result in bad running engine, or even non operational engine. Ignition is always after
static angle(trigger point)...that means that static angle must be always greater than
maximum ignition advance.
Enter
Set Ign.
menu and move to
Static Angle
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Set static angle with pressing
'
+
'
, or
'
-
'
(in 0.1deg steps) and press
'
ENTER
'
to confirm.
