Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
22
of
38
Figure 32 - Incorrect configuration status of Wi-Fi adapter
Check that the Modbus address set on the display of the inverter is 01 and in any case different from
00. To do this, refer to the next paragraph of the document.
Check that the external logger is correctly and securely connected to the inverter, making sure to
tighten the two cross screws supplied with the Wi-Fi card.
4)
Incorrect configuration status of Wi-Fi adapter:
Left LED off
Central LED off
Right LED flashing
Figure 33 - Incorrect configuration status of Wi-Fi adapter
Check that the Modbus address set on the display of the inverter is 01 and in any case different from
00. To do this, refer to the next paragraph of the document.
