Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
25
of
38
Figure 36 – Screen for accessing the configuration page of the Wi-Fi card
The following page will open:
Figure 37 – Status screen
4)
Make sure that “Remote Server A” is configured to “Pingable.”
5)
In the Wireless STA mode section, check that there is an actual IP address and not
000.000.0.000.
6)
Check that the router name (SSID Router) is actually the one you are connected to (not the
default name AP_SOLAR_PORTAL_) and that the signal percentage (Signal Quality) is greater
than 30% and however different from 0%.
