Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
3
of
38
Figure 1 – Internal Wi-Fi card (left) and external Wi-Fi adapter (right)
It is also necessary to makes sue that the AzzurroZCS inverter is compatible with the Wi-Fi model, as shown in
the table below
Internal Wi-Fi card (code ZSM-WIFI-KIT)
External Wi-Fi adapter (code ZSM-WIFI-EXT)
Azzurro ZCS 1.1-3K TL inverter
Azzurro ZCS 3-6K TLM LITE inverter
Azzurro ZCS 3-6K TLM inverter
Azzurro ZCS 4.4-12K TL-X inverter
Azzurro ZCS 3000SP storage inverter
Azzurro ZCS 10-20K TL Inverter
Azzurro ZCS 20-33K TL-G2 Inverter
Azzurro ZCS 30-40K TL Inverter
Azzurro ZCS 50-70K TL Inverter
Azzurro ZCS HYD 3-6K – ES hybrid inverter
The Wi-Fi card, whether internal or external, must be installed by an installer or technician who is specialised
and able to carry out the procedure described in this document. In particular, the internal card requires the
opening of the front cover of the inverter, an operation which, if not carried out correctly, can cause damage
to people, objects or the inverter itself.
The configuration of the Wi-Fi card, whether internal or external, requires the presence of a Wi-Fi network
near the inverter in order to obtain a stable transmission of data from the inverter to the Wi-Fi modem.
The configuration can be done by means of a smartphone, PC, tablet or any other device that can be
connected to a Wi-Fi network.
The configuration procedure can be performed at any time, as long as it is near the inverter at the time it is
switched on. It is also required to know the password of the modem to which you want to connect the Wi-Fi
card.
