Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
15
of
38
3)
Insert the Wi-Fi adapter in the seat, taking care to follow the direction of the insertion and ensure
proper contact between the two parts. Secure the external Wi-Fi adapter by tightening the two
screws inside the package.
4)
Turn on the inverter following the procedure described in the manual:
a.
In the case of a photovoltaic inverter, first supply DC voltage and then AC voltage by means of
the appropriate switches and ON/OFF buttons.
b.
In the case of a hybrid inverter, first supply DC voltage from the batteries (ON/OFF or POWER
switch on the batteries), then the AC voltage via the appropriate switch and finally voltage
from the photovoltaic panels. For more details, refer to the appropriate section in the user
manual.
3.2 PROCEDURE FOR CONFIGURING AN EXTERNAL WI-FI ADAPTER
Position yourself in front of the inverter and search for the Wi-Fi network using a smartphone or computer,
to make sure that the signal from the home Wi-Fi network reaches the place where the inverter is installed.
If the Wi-Fi signal is present in the location where the inverter is installed, you can proceed with the
configuration procedure.
If the Wi-Fi signal does not reach the inverter, it is necessary to install a system that amplifies the signal and
brings it to the place of installation.
1)
Search for the Wi-Fi networks on your telephone or PC so that all the networks visible from your
device are displayed.
Figure 20 – Search for Wi-Fi networks on a Smartphone (iOS)
Impostazioni
Settings
Le nuove connessioni Wi-Fi sono state disattivate dal centro di controllo New Wi-Fi network connections have been turned off from the Control
Center
SCEGLI UNA RETE….
CHOOSE A NETWORK…..
