ZBE CHROMIRA, Руководство пользователя

Страница: 54 / 93

Chromira 54
Description Cause
Lines appear on one side of image
(usually left-hand side), but go away
after 24 inches or less of print, and do
not come back. Paper loaded incorrectly. Be sure that
when you thread the paper onto the
take-up core, you align the left edge
with the end of the core.
The machine is likely OK.
Lines appear all the way across the
paper, but go away after 24 inches or
less of print, or fan in after about 24
inches of print. The Chromira head is Experiencing a
slight “drift” in balance. This can be
overcome by printing about 12 inches
of print, then immediately making a
Test Print, and using it or the Scanner
Analysis. This way, the print head will
have been stabilized when it makes the
test print.
Afterwards, always make a 12-inch print
of some sort before printing critical
images and before test prints. It is
important that the jobs be queued up
so that the printer does not stop printing
for more than a few seconds before the
Test Print is made.