Rev. 3/2001 43
Procedure
Start by deciding where the balance application should be installed. The
Balance application does not need to be on the Chromira computer. It can be
on any other computer as long as the computer meets the following
requirements:
a.
Computer is a PC, preferably Windows (any version, example, 95’ 98’) or
Windows NT.
b.
Computer is logged and shared on network so that it can communicate
with the Chromira computer.
c.
Computer has a scuzzy card to allow for the UMAX scanner.
d.
Computer has a free com port for densitometer (optional).
If you do decide to install the balance application on another computer other
than the Chromira printer, please see installation technician or call ZBE technical
support.
Making a Calibration Image or Test Print
Once the Balance Application location has been established, the next step is to
start the calibration procedure. A calibration image will be needed for the
balancing. The location of this image can be found on the
Chromira Printer
Application. Clicking on the calibration icon on the icon bar of the Printer
application will automatically print the image.
Содержание CHROMIRA
