ZBE CHROMIRA, Руководство пользователя

Страница: 23 / 93

Rev. 3/2001 23
This is a number that allows you to adjust where the image is printed on the paper.
Change this number if your images are being cut off along the left-hand edge of
the paper (image too far to the left on paper), or if you consistently see a white strip
along the left edge (image too far right on the paper).
The Paper Edge Offset number is in printer pixels, 100 per inch. The Calibration
Image that is used for the Chromira’s calibration has a scale at the left end of the
image. This scale can be used to determine how much to change this number if
your prints are not positioned properly on the page.
Width Scale / Length Scale:
Allows the operator to adjust the width or length of prints if the scaling is not
correct.
Air Off Option:
This function turns off the air. The air will automatically shut off after the machine
sits idle for a specified amount of time, as determined by the operator.
Pause Alarm:
Alarm sounds and pop-up window appears to notify the operator that the printer
has paused.
Queue Empty Alarm:
Alarm sounds and pop up-window appears to notify the operator that the printer
has an empty print queue.
Diagnostic Data Logging: