ZBE CHROMIRA, Руководство пользователя

Страница: 48 / 93

Chromira 48
materials ("ultra-gloss", polyester based), the D-max targets should be about 2.10
for all three colors. For dura-trans or clear materials (transparent or translucent
films), the D-Max targets should be set to about 2.90 to 3.00 to start with. Please
see the section "D-max Failure" near at the end of this document, or contact ZBE,
for more information.
4: Click the "Done" button. When the last patch, white patch 16, is read, the
graph should look complete. If everything looks correct, the “Done” button will
exit this dialog box back to the main screen, and calculate the changes to the
EMU file that are necessary to correct the color balance. These changes will not
be made to the EMU file itself until you click the "Apply Changes" button.
Remember to click the "Apply Changes" button when you have finished your
analyses for this balance cycle.
Advance Settings
Located in the lower left hand corner of the Balance window is a button marked
“Advanced”. To access it, click on the button. The following window will appear:
Balance Gains:
Refers to the amount of correction the scanner will make with each cycle. The
default setting is set to one for each of the three colors. These values should not be
changed, unless directed by a ZBE technician.