KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if
you would like to take the bread out, switch the program off by pressing the
START/STOP
button.
MEMORY
If the power supply has been interrupted during operating, the process of making
bread will be continued automatically within 10 minutes, even without pressing
“
START/STOP
” button. If the interruption time is longer than
10 minutes
, you must
discard the ingredients in the baking mould and add the ingredients into baking mould
again, and the bread maker must be restarted. But if the dough has not entered the
rising phase when the power supply breaks off, you can press the “
START/STOP”
button directly to continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be any
difference in loaf size between a very warm room and a very cold room. We suggest
that the room temperature should be within the range of 15
℃
to 34
℃
.
WARNING DISPLAY
1. If the display shows “HHH” after the program has been started, it means that the
temperature inside of baking mould is too high. You should stop the program and
unplugged the power outlet immediately. Then open the lid and let the machine cool
down completely before using again
(except the program of BAKE and JAM)
. If the
display shows “LLL” after the program has been started, it means that the temperature
inside of baking mould is too low. You should place the bread maker into environment
of higher temperature for using
(except the program of BAKE and JAM)
.
2. If the display shows “EE0” after you have pressed START/STOP
button, it means
the temperature sensor open circuit, please check the sensor carefully by Authorized
expert. If the display shows “EE1”, it means the temperature sensor short circuit.
BEFORE THE FIRST USE
The appliance may emit a little smoke and a characteristic smell when you turn it on for
the first time. This is normal and will soon stop. Make sure the appliance has
sufficient ventilation.
1. Unpack your appliance
and check whether all parts and accessories are complete
and free of damage.
2. Clean all the parts according to the section“
Cleaning and Maintenance
”.
3. Set the bread maker on bake mode and bake empty for about 10 minutes. Then let