The oven door can close if you try to
remove the internal glass panel
before you remove the oven door.
CAUTION!
Do not use the appliance without the
internal glass panel.
1
Open the door fully
and hold the two
door hinges.
1
2
Lift and turn the
levers on the two
hinges.
2
3
Close the oven door
halfway to the first
opening position.
Then pull forward and
remove the door from
its seat.
3
4
Put the door on a soft
cloth on a stable
surface.
4
5
Release the locking
system to remove the
internal glass panel.
5
90°
6
Turn the two
fasteners by 90° and
remove them from
their seats.
6
2
1
7
First lift carefully and
then remove the
glass panel.
7
Clean the glass panel with water and soap. Dry
the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the above
steps in the opposite sequence.
The screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel frame
on the screen-printing zones is not rough when
you touch it.
The first panel (A) has a decorative frame. The
screen-printing zone must face the inner side of
the door. Make sure that after the installation
the surface of the glass panel frame (A) on the
screen-printing zones is not rough when you
touch it.
Make sure that you install the internal glass
panel in the seats correctly.
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
www.zanussi.com
15