Zander Aachen MVisio HMI Lite, Руководство по эксплуатации

Страница: 5 / 23

H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
5
Operating Manual MVisio Industrial HMI Lite
2. General safety instructions
Warning,
Caution

Only authorized and qualified personnel may install the device and put it
into operation, i.e. personnel which
-
is well-acquainted with correct technical handling of the electrical
machine equipment,
-
is familiar with the applicable regulations concerning occupational
safety and accident prevention,
-
has read and understood the operating manual and, if applicable,
the programming manual.

In case of incorrect connection or inappropriate use, the safe functioning of
the device during operation will no longer be guaranteed. This can result in
fatal injuries or serious material loss.

Please observe the national guidelines which are valid for the commission-
ing of the device.

The electrical connection of the device must only take place when the volt-
age supply is switched off. This also applies to the connected sensors and
actuators.

The wiring of the device must be done in conformance with the instructions
given in this operating manual.

The person who installs and commissions the device must be protected
against electrostatic charges (ground strap or ESD shoes in connection
with ESD flooring).

Opening of the device and any manipulations to the device are not allowed
and shall result in loss of warranty and warranty claims.

Please observe all the relevant safety guidelines and standards.

Non-observance of the safety guidelines can result in death, serious injury
and property damage.

Please read the operating manual before use and preserve it carefully.

Please ensure that the operating manual is always available at the time of
assembly, commissioning and maintenance work.