H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
9
Operating Manual MVisio Industrial HMI Lite
4.2
Environmental data
Parameter
Data
Standard
Surrounding temperature
0 to +50°C (vertical assembly)
EN 60068-2-14
Storage temperature
-
20 to +70°C
EN 60068-2-14
EN 60068-2-2
Humidity Rating
5 to 85% r.h., non-bedewing
EN 60068-2-30
Oscillation
5 to 9 Hz, 7 mm
p-p
9 … 150 Hz, 1g
EN 60068-2-6
Shock
±50 g, 11 ms, 3 pulses per axis EN 60068-2-27
Protection class, front
IP66
EN 60529
Protection class, back
IP20
EN 60529
4.3
Electromagnetic compatibility
Parameter
Data
Standard
Radiation disturbance test
Class A
CISPR 22
CISPR 16-2-3
Immunity to ESD
8 kV (electrostatic discharge in the air)
4 kV (electrostatic contact discharge)
EN 6100-4-2
Immunity to radiated interference 80 MHz … 1 GHz, 10 V/m
1.4 GHz … 2 GHz, 3 V/m
2 GHZ … 2.7 GHz, 1 V/m
EN 61000-4-3
Note!
The front of the device has been tested under above conditions in ac-
cordance with the listed standards. Although the resistance level of the
device meets the standards, oils that are expected to have no influence
on the MVisio HMI Lite, may damage the device. This might happen in
places with vaporous oils or when cutting oils with low viscosity adhere
on the device for a longer period of time. If the front foil detaches or is
being damaged, oil might get into the device. In this case,
separate
protective
measures
are
recommended.
If the installation seal is used for a long period of time or if the device
and its seal are removed from the mounting panel, the original type of
protection can not be guaranteed.
