Zander Aachen MVisio HMI Lite, Руководство по эксплуатации

Страница: 19 / 23

H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
19
Operating Manual MVisio Industrial HMI Lite
9. Additional application notes

Install the HMI Lite in accordance to this operating manual and the enclosed instal-
lation guide.

Ground the HMI Lite in accordance to this operating manual and the enclosed in-
stallation guide.

Only qualified personnel is allowed to install or repair the HMI Lite.

Please make sure the ventilation holes are not covered.

To avoid static electricity charge, make sure the front plate of the HMI Lite stays
clean. The device must only be cleaned with a soft cloth and neutral soap.
10. First steps
10.1 Programming with CODESYS
The HMI Lite will be delivered with a pre-installed CODESYS-runtime. CODESYS
(≥ V 3.5.12.0) and the corresponding packages for the HMI Lite must be installed on a PC
with Microsoft Windows. CODESYS is a free-to-use software and can be downloaded
here: https://store.codesys.com/. The corresponding packages can be found on the includ-
ed USB memory stick. For further information regarding the installation, please see the
MVisio HMI Lite installation guide.
10.2 System settings
The MVisio HMI Lite has a menu in which the system settings can be configured. The user
interface of the system settings is based on HTML-pages which are accessible via the
HMI Lite screen or via the web browser Chrome (V.44 or higher) using port 443 (see figure
11). To access the interface via web browser, type https://IP, with “IP” being the IP-
address of your HMI Lite. The default username is “admin”, the default password is
“admin”. Use the navigation bar on the left to browse through the available settings. The
active menu is highlighted on the left. Information and settings are displayed on the right
side of the screen. Dependant on the size of the display, the content as well as the menu
can be displayed both at the same time.
Warning!
Undefined conditions may occur when modifying the system settings during
operational mode. Restart or loss of function may be the consequence!

Do not make any changes to the system settings during the ongoing oper-
ation.

Switch off the machine first and cut off the connection between the HMI
Lite and the machine before modifying the system settings.