• Pressing the „ ” push-button realises the roller blind opening function. During opening, the
push-button „ ” is backlit and its opening time is consistent with time configured in a receiver.
The backlight of the „ ” push-button is switched off, after the opening time is over.
• Pressing the „ ” push-button realises the roller blind closing function. During closing, the
„ ” push-button is backlit and its closing time is consistent with time configured in a receiver.
The backlight of the „ ” push-button is switched off, after the opening time is over.
• Pressing the „ ” or the „ ” push-button during opening or closing a roller blind, causes it is
stopped. The backlight of the “…” push-button is switched off after the roller blind is stopped.
• Current roller blind closing position is shown in the mobile application in the form of % value. It
is updated after the roller blind is stopped. Additionally, an icon signals the roller blind operation
mode. There are only three different icons: fully opened roller blind, fully closed roller blind, half
opened roller blind.
• In case of slide control, move it in the right direction to adjust the percentage of roller blind
closure. This value is sent to a device just after the slide is released. A roller blind starts moving
to the selected position.
Correct configuration of roller blind motion time (opening / closing) is required, so that the
roller blind controller can operate properly by means of the mobile application. The % of
roller blind closure is calculated on the basis of these times.
Favourite position positions:
• By means of a mobile application, it is possible to set maximum 4 „favourite” settings, under-
stood as a defined % of roller blind closure for each SRP-22. Favourite push-buttons must be
used to activate these settings.
• Initially the settings are not defined. It is signalled by the “-” symbol placed in the push-button.
• To assign a favourite position to a push-button, use a slide to adjust the percentage of roller
blind closure and press the selected favourite setting for a longer time. The defined value, after
it has been correctly assigned, is displayed in the field.
• Pressing the defined favourite push-button shortly, causes it is backlit and its value, defining
the roller blind closure, is sent to a particular controller. The roller blind moves to the required
position. The slide moves also to the selected favourite setting. However, changing the slide
position, we switch off the favourite setting.
• Favourite settings activated by a mobile application are assigned to a particular controller. Their
positions can differ from the ones programmed for radio transmitters and wired inputs in the
local mode.
• Favourite settings can be defined only by authorised users (administrator). They cannot be
changed and edited by standard users.
Controller name
Current roller blind position icon
Current roller blind closing position
Roller blind closing control slide 1 ÷ 99%
Control
push-buttons
Push-button to define
4 favourite settings