Central control
In this mode, pressing shortly (<0,5 sec.) suitable push-buttons connected to IN1, IN2 inputs, ac-
tivates the following modes: opening and closing a roller blind. After the adjusted time is over, the
roller blind is stopped. Its default time is 120 sec. In case the roller blind is in motion, but there is
a central order (impulse) contrary to its moving direction, then the roller blind is stopped for about
0,5 sec. and it automatically moves in the opposite direction.
CAUTION: IN1, IN2 input configuration to operate in the central mode is possible only
by means of the EXTA LIFE mobile application, but in cooperation with a controller. This
application defines the function of IN1 and IN2 input (upward / downward movement of a
roller blind).
SINGLE ROLLER BLIND PUSH-BUTTON
Local control
In this mode, pressing shortly (<0,5 sec.) a roller blind push-button activates the following modes:
opening, closing or stopping. Roller blind movement time is in accordance with time adjusted in
the controller. The default time is 120 seconds. The roller blind movement operates according to
a sequence: open – stop - close. Longer pressing (>2 sec.) a push-button causes the activation
of programmed favourite settings. By favourite settings we understand a defined % of roller blind
closure. A single push-button can activate only one favourite setting (programmed as setting “1”).
Central control
In this mode, pressing shortly (<0,5 sec.) a roller blind push-button, the SRP-22 activates only
the following modes: opening and closing. Roller blind movement time is in accordance with time
adjusted in the controller. The default time is 120 seconds. The roller blind movement operates
according to a sequence: open – stop for about 0,5 sec. – close.
CAUTION: To connect a single roller blind push-button, configure inputs by means of a
mobile application in cooperation with the EXTA LIFE controller. Select the type of input
‘single roller blind push-button’ and define the input operation mode as ‘Local mode’ or
‘Central mode’. If the input type understood as “Single roller blind push-button” is se-
lected by means of the mobile application, the push-button can be connected to IN1 or
IN2 input (their operation is the same). The single push-button can also be connected by
a short-circuit of IN1 and IN2 inputs (configuration by means of a mobile application is
not required then).
FUNCTIONALITY BY MEANS OF EXTA LIFE
MOBILE APPLICATION CONTROL
Control of the SRP-22 receiver by means of a mobile application is possible only after it has been
paired with the EXTA LIFE controller (see SRP-22 RECEIVER REGISTER (PAIRING) in EXTA
LIFE SYSTEM).
After pairing, the controller is visible on the receivers’ list in the EXTA LIFE system and can be
controlled at once.
