DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
34
7.5
Configure MPTS
(1)
Click on the MPTS tab.
(2)
Set the total MPTS transport rate. This should equal the total transport rate of all channels being fed
into the MPTS + a 20% margin.
(3)
Set the destination(s). In the example below, the two destinations are ASI out and the UDP address
221.1.2.3, port 6000:
7.6
Start Encoding
(4)
Go to the bottom of any tab and click “Start All”
Figure 37 The “Start All” Button
Click here
Figure 36 MPTS Settings
