DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
29
6.10
Using the “Aux TS File” Option
When encoding UDP, the user can also simultaneously save the TS stream to a file by setting “Aux TS File
Enable” to true. When this is done, they can then specify the file name in the “Aux TS File Location”
box that appears. If a user connects a USB drive, for example, a value of
“/media/sda1/encode_mve100r.ts” would save to “encode_mve100r.ts” on that drive. Sample values
are shown below.
*Note:
After clicking “stop”, the user should wait at least 10 seconds before removing the USB drive
from the Z3-MVE-100R. This will ensure all buffered data finishes transferring to the USB drive.
Figure 32 Using the Aux TS File Enable Option
