DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15
(11)
After 20 seconds, the encoder will automatically try to start. If it has done so, click on “stop” near
the bottom of the screen. The status should then change to “STOPPED”. Then click on “start”. If
the encoder had not already started, simply click “start.”
Figure 9 Z3-MVE-100R Channel 1 Configuration Screen for UDP
(4) If necessary, click “stop”
(5) Status changes to “STOPPED”
(1) Change to UDP
(2) Change to IP
Address of your PC
(3) Confirm “Dest
Port” is 5004
(6) Click “start”
(4) If necessary, click “stop”
(5) Status changes to “STOPPED”
