IOMOD10F Calibration Module for Z-Wave 500 Series IC and modules - User Manual - V2.06 06/10/2017
5
2.0 IOMOD10F - General Product Information
2.1 Ordering information
This table below details the order codes for the various IOMOD calibration systems....
See
section
Kit Order Code
Further information
2.2
IOMOD10F-KIT
This is the legacy IOMOD10 kit which included an
IOMOD10F
3.3V power supply.
Availability:
Discontinued due to obsolescence of the 3.3V
power supply used to power the IOMOD10F module
2.3
EQ-RBK-
ZWAVECALIBOX-3
This is a new
IOMOD10 kit
which includes an
IOMOD10F
module plus a re-designed
'Carrier Board'
which features an
integrated 3.3V power supply on the
'Carrier Board'
.
Availability: current product
2.2 IOMOD10F kit (module only) - System Contents
The
IOMOD10F
module when ordered as an
'IOMOD10F kit'
(Order code: EQ-IOMOD10F-KIT)
comes with the following components...
Hardware:
•
1 x IOMOD10F V1.1 module (actual
'Calibration Module'
hardware)
•
1 x 9V Power Supply
•
1 x Set of mains plug adaptors - UK, USA, European, Asia
•
1 x 10-way 0.1" pitch IDC cable
Software:
•
The
IOMOD10F
module does NOT come with any software.
•
Please see application note AN145 for details of how to control the
IOMOD10F
module.
Documentation:
•
1 x
IOMOD10F
- User Manual (printed)
PLEASE NOTE:
This
EQ-IOMOD10F-KIT
is no longer available due to the obsolescence of the 3.3V power supply
used with the IOMOD10F module.
The replacement product is the
EQ-IOMOD14-KIT
which features the new IOMOD14 calibration
