IOMOD10F Calibration Module for Z-Wave 500 Series IC and modules - User Manual - V2.06 06/10/2017
22
Appendix 2 - IOMOD10F 'Carrier Board'
1.0 Overview
It is possible to use the
IOMOD10F - Sigma calibration module
without using an Equinox
ISPnano
programmer. This allows the module to be used for performing
'XTAL calibration'
when connected to
a customer's own in-house
'programming system'
or the
'Sigma evaluation board'
.
To use the
IOMOD10F
module without an
ISPnano
programmer, it is necessary to fit the
IOMOD10F
module into the
'IOMOD10F - Carrier Board'
- see illustrations below.....
IOMOD10 Carrier Board V2 on its own
IOMOD10 module V1.1 fitted to the
IOMOD10 Carrier Board V2
The
'IOMOD10F - Carrier Board'
is simply a
'base board'
which the standard
'IOMOD10F module'
plugs into. The carrier board then allows an
'external programmer'
to connect to the
'IOMOD10F
module'
via a 10-way IDC connector.
Important note:
The new
V2.00 PCB
version of the
'Carrier Board'
features an integrated 3.3V power supply which is
used to power the
IOMOD10F
module.
