IOMOD10F Calibration Module for Z-Wave 500 Series IC and modules - User Manual - V2.06 06/10/2017
7
2.4 IOMOD10F module - Hardware layout
The illustration below shows the relevant hardware items on the
‘IOMOD10’
module......
PCB
Label
Diagram
#
Functional description
CONNECTORS
J2
10
DC Power Input
(2.1mm Jack Socket - centre positive)
J5
4
Programming / Calibration Signals
Connector type:
10-way IDC - Equinox / Sigma pin-out
Purpose:
Connect to 'external programmer' e.g. Sigma eval board
J6
8
Programming / Calibration Signals
(Quick connect connector)
Connector type:
Quick connect connector
Purpose:
Connect 'programming signals' to target Z-Wave device / fixture
probe pins
J8
11
Power Connectors
Connector type:
Quick connect connector
Purpose:
Connect 'power signals' to target Z-Wave device / fixture probe
pins
JUMPER LINKS
LK1
3
Enable Calibration Output (Manual Test only)
For test purposes only
.
DO NOT
fit this jumper during normal operation.
LK2
7
Calibration Clock - Output Pin Select
