IOMOD10F Calibration Module for Z-Wave 500 Series IC and modules - User Manual - V2.06 06/10/2017
18
1.1 Fitting the IOMOD10F module to the ISPnano programmer
The
‘IOMOD10F’
module fits onto the
'ISPnano Series 4 ATE'
programmer as shown in the picture
below.....
Instructions:
•
Position the
‘IOMOD10F’
module over the IOMOD connectors on the programmer
motherboard - see picture above.
•
Gently push the
‘IOMOD10F’
module down at both ends at the same time.
•
The module should lock into place on the programmer.
