23
3.2
Equipment button instruction
Fig.3-9
Master Power Switch
①
Air switch
②
key switch lock
③
Laser control switch
④
Emergency stop switch
Air switch: pull up the air switch to turn on the main power, ensure that all buttons pop up before
connecting the power to avoid damage to the electrical parts and optical parts due to large transient current.
Key switch lock: the power switch of all control buttons of the machine and the computer; when the key
is turned clockwise, the control buttons and the computer are turned on; when the key is turned
counterclockwise, the control buttons and the computer are turned off.
Laser control switch: self-locking illuminated pushbutton, CO2 RF laser power; when it is pressed down,
the LED is on and laser emits.
Emergency stop switch: located on the main stand of the monitor; when the emergency stop button is
pressed down, the system power won’t be cut off, RF laser is protected and laser emission is prohibited;
when the emergency stop button is rotated and popped up, the laser emission is effective.
Attention
After press down emergency stop button, all equipment of the power
will be cut off, necessary if need to power off the machine, should be
shut off the main power switch and unplug the power cable.
Only in has ruled out an emergency and correct all defects or repaired
the failure cases can loosen the stop to continue operating the machine
Note
After emergency rule out will be pressing the stop button clockwise
rotate its automatic reset, will be terminate the stop state.
Must be restart software after removed stop condition, equipment shall
be resumed work.
①
②
③
④
