YSI 2700 SELECT, Руководство пользователя

Страница: 139 / 165

9-14
When you invoke the Process Sample (PS) command, the Host commands the 2700 to sample
from one of four locations depending on the specific command (PS1, PS2, PS4 or PS5). If the
2700 is running an autocalibration, calibration stabilization or baseline stabilization, the
command is acknowledged and the sample is processed as soon as the instrument finishes the
existing task.
Host to 2700: PS Process sample at PS1, PS2, PS4 or PS5.
2700 to Host: A Acknowledge. Sample in process or pending
upon completion of current task.
1 2700 is not in Remote Control Mode.
2 2700 is busy processing last PC or
PS command.
9 For PS2 command, Test Tube Holder switch
is off.
The PS command may take three optional arguments:
PS[s][;t][;n]
In these arguments s is the station number from which to sample. If s is not given, or NULL,
the currently assigned sample station is used.
The character t is the turntable starting position, which is only valid when s = 4. Remember,
station #4 is the turntable sampling position. If t is not provided or NULL, the default starting
position will be used.
The character n is the number of turntable positions to be sampled, which also is only valid
when s = 4. If n is not given or NULL, the default value will be used.
When the Clear Database Memory (RZ) command is invoked, all of the sample results
maintained by the 2700 database are cleared. It is useful when the remote host is first switched
to Remote Control Mode and wants to "forget" all previous samples that have been taken by an
operator.
Host to 2700: RZ Clear 2700 database memory
2700 to Host: A Acknowledge. Result data cleared.
1 2700 is not in Remote Control Mode.