manualshive.com logo in svg

Ypsomed YpsoPump, Руководство пользователя

Поделиться
Скачать
Ypsomed YpsoPump Скачать руководство пользователя страница 137

137

7.6 Preparing for storage

If you will not be using the YpsoPump

®

 

for a longer period, set your insulin 
pump into stop mode and remove the 
battery from the insulin pump to avoid 
any damage caused by a leaking 
battery. That puts the insulin pump in 
storage status. In the storage status 
the settings remain intact (basal rate, 
bolus increment, etc.).

When preparing your YpsoPump

®

 for storage, remove the cartridge and the infusion set and dispose of the 

tubing and cannula base in a safety bin.

After a restart all you have to do is 
perform the self-test and reset the 
time of day and date. After that, 
the insulin pump is in stop mode. A 
threaded rod return followed by  
priming has to be performed to put 
the insulin pump back into operation.  
Follow the procedure on page 31.

Содержание YpsoPump













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды