www.youfibercable.com
Email:[email protected] MSN:[email protected]
31
Voltage
≥
12.5V
Voltage 12.1V
Voltage 11.8V
Voltage 11.5V
Voltage
<
11.5V
Green light or red light open
О
Green light or red light off
B. When being charging, 4 light on the left of power module are in red, it represent the voltage, not
the electric quantity.
2) Charge the battery:
Battery is being charged when AC/DC adapter
（
13.5V /5A
）
is inserted no matter how
much is the quantity of battery. Duration of charging is between 3 hours 40 minutes and 40
minutes, depending on the quantity of battery, red lights indicate being charging, green lights
indicate ending of charging.
3) Notice:
A.
Please check the electric quantity before using machine and charge in time.
B.
P
utting the battery in hot environment or into fire is prohibited.
C.
Please do not charge the battery in low environment to avoid reduce the working life.
D.
Taking down the battery is prohibited.
E.
Battery is expendable; please replace it with the type of battery appointed by our company
when the machine could not work with green lights on.
F.
Please charge the battery in time when you could not start the machine or machine warns. As
shown in photo.
16
Addenda E Cleaning of V- groove and Fiber optical
1. Set gap, when two fibers are not vertically aimed, machine shows “ set fiber again” or
“ R&L BAD CLEAVE” ( as the photo)
2. Check and clean V-groove for the first time
Please be careful and don’t push hard while cleaning V-groove. Use cotton swab dipped by
alcohol to brush slightly, use fiber end to clean the dust and make sure there is enough light.
Clean the dust from V-groove so that machine work correctly. Check according priority:
bending of fiber, press board of fiber. Make sure the restrict groove and V-groove of the big
board is in one line, make sure there is no dust in V-groove.
08-10-10 15:30
AUTO (SM)
Estibate Loss: 0.01dB