www.youfibercable.com
Email:[email protected] MSN:[email protected]
2
Warning (ignore the warning, non-proper use of fusion splicer could lead to fatal
and serious injury)
1.
The input voltage of this model of Fusion Splicer is definite; please do not
use the voltage outside the scope. Please use the correct AC and DC power
supply.
2.
When the fusion splicer comes across the following failures, please
immediately remove the AC adaptor power cord from the power supply
input and turn off the fusion splicer, otherwise will lead to the incapable of
the repairing and even will cause personal injury, death and fire.
★
Smoke, smell, noise or heat anomaly
★
Liquid or foreign matter enters the interior of the machine
★
Broken or damaged machines
3.
This model of fusion splicer does not have the need to maintain internal
components, dismantling of fusion splicer and power modules is prohibited;
any mistake in maintenance will lead to the machine beyond repair even
causing bodily harm.
4.
This model of fusion splicer has strictly limitation to the power supply
module used.
5.
The fusion splicer is prohibited to be used under the environment with the
inflammable liquid or flammable gas; otherwise will lead to fire, explosion
and other serious consequences.
Notes:
1.
This model of fusion splicer is used for the fusion of quartz glass fiber;
please do not use this machine for other usages. Please read this manual
carefully before using.
2.
Please do not deposit fusion splicer under the environment with high
temperature or humidity.
3.
If the fusion splicer is used in the environment with lots of dust, it should
avoid dust as far as possible.
4.
When the fusion splicer moves from the low-temperature environment to
high-temperature environment, heating process must be ensured as possible
to eliminate condensation.
5.
In order to maintain fusion splicer’s performance, recommend to do
complete machine maintenance once a year.
6.
The fusion splicer has been precision calibrated, please try to avoid strong
vibration, and impact, and use dedicated box for transportation and storage.
The fusion splicer must be repaired and debugged by specialized
technical personnel, for the appeared problems, please contact the
manufacturers in a timely manner.