aquaMAX
TM
– Ultra 370 Series
- 10 -
2-2. Installation Guide
1. Unpacking
Carefully check the contents according to the packing list.
2. Installation of the ULTRA-Pack(1,2) cartridge
: Follow the steps below.
1 2 3
［
Fig. 2-2
］
Installation of Ultra Pack
- Take off caps for input and output from Ultra Pack 1,2 ( The black cap in the picture above.)
Open the door in front and Press down the clip connected to the fitting making a sound like "click".
Insert the filter to fix into the marked fitting by making "click" sound. There is an indicating mark at the lower
part of filter not to install the filter upside down. Slightly pull out the filters to make sure it has been fixed well.
3. Installation of the Final Filter
There is a holder on the left side of the door. Install the final filter to the holder.
Connect the fitting under the final filter. Wind a reel with Teflon tape about 10 rounds.
［
Fig. 2-3
］
Installation of Final Filter
