York YHKJXH012BAM--FX, Руководство по обслуживанию

Страница: 64 / 161

3. Installing brackets
Install the brackets with nuts, washers and spring
washers. (Fig.14)
Spring washer
Special nut
Bracket
4. Installing indoor unit
Bracket (Right)
Bracket (Left)
Reset the hex bolts as shown in Fig.15.
Hex bolt
8 to 13mm
Indoor unit
Apply the indoor unit to the brackets. (Fig.16)
Now, securely tighten the hex bolts in both sides.
Bolt
Bracket
Indoor unit
Select whether the drain hose will be connected to the left or right side.(Fig.2)
Insert the drain hose into the drain pan, then secure the drain hose with a nylon fastener.(Fig.5)
Wrap the insulation (drain hose) around the drain hose connection. (Fig.6)
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor
unit. (Fig.17)
5. Installing the drain hose
NO
OK
Piping hole
Base (Bottom)
Intake grill
VT wire hole
Pass the drain hose through here
Cut the grill
VT wire
Drain hose
Installation Procedure
Fig.15
Fig.14A Fig.14B
Fig.16
Fig.17
When drain hose is arranged backward. Secure the drain hose with the VT wire. (Fig.18)
Fig.18
Remove the hole cover.
Arrange the drain hose
lower than this portion
Drain hose
64