manualshive.com logo in svg

York YCAZ33BA3, Руководство пользователя, Страница: 81 / 88

Поделиться
Скачать
York YCAZ33BA3 Скачать руководство пользователя страница 81

FORM 150.44-NM4

81

YORK INTERNATIONAL

OPTIONAL DECORATIVE TAMPERPROOF

ENCLOSURE (LOUVERED)

General

A louvered enclosure is available for the chiller for the

prime purpose of deterring unauthorized access to

components of the chiller.
Kit 475-05661-002 is the decorative / tamperproof en-

closure which consists entirely of louvered sheet metal

panels along with mounting hardware. This kit has a

further purpose of presenting a pleasing appearance

to the chiller when it is located in a highly visible area.

Installation

1. Refer to Fig. 35 and the associated parts list. Be-

fore starting installation, all of the items in the kit

should be identified by comparing with Fig. 36.

2. All holes for mounting kit parts are provided in both

the chiller frame and the added supports; therefore,

it should be unnecessary to drill holes.

3. Installed the louvered panels using the proper hard-

ware and supports. Refer to Fig. 36 and the Parts

List for placement of the grilles / panels and the

proper hardware required. Discard existing grilles

to attach the louvered panels where necessary.

4. Notch grilles to suit water connection and wiring

harnesses as needed.

5. If the High Ambient Sunshield Kit or Disconnect

Option is installed, field adaption will be required

where parts of the kits interfere. Touch up exposed

metal parts to prevent rust.

FIG. 35 –

COMPLETED INSULATION

25246A

FIG. 34 –

WIRE GRILLE INSTALLATION (Cont’d)

LD02014

PART #

ITEM

QTY.

DESCRIPTION

021-16161-000

2

18

Screw, Cap Hex 1/4-20

021-16128-000

3

18

Lock Washer TH INT 1/4

021-16151-000

4

18

Nut, Hex 1/4-20

021-16165-000

5

6

Washer PL 5/16 x 3/4

021-16136-000

6

97

Screw, Tap Cut 1/4-20

021-17515-000

7

11

Screw, Tap Cut 1/4-20 x 1

075-05463-000

20

1

Support, Grille Front Bot.

066-94647-000

21

3

Support, Grille Rear Top

075-01700-000

22

6

Panel Louver

075-05660-000

23

1

Panel Louver

075-05659-000

24

1

Panel, Louver

075-05641-000

25

1

Support, Top R.H. Grille

075-05656-000

26

1

Panel, Louver

075-05657-000

27

1

Panel, Louver

075-05658-000

28

1

Panel, Louver

075-01671-000

29

2

Cllp, Retainer

066-94664-000

30

1

Support, Louver

066-94667-000

31

1

Support, Louver

075-01655-000

32

1

Panel, Louver

075-01670-000

33

1

Panel, Top

066-94666-000

34

2

Support, Louver

066-94663-000

35

2

Support, Louver

075-01654-000

36

1

Panel, Louver

075-01656-000

37

1

Panel Louver

075-05642-000

38

1

Support, Top L.H. Grille

075-05645-000

39

1

Support, Top L.H. Grille

075-05646-000

40

2

Support, Grille

075-05647-000

41

2

Support, Grille

Parts List

Содержание YCAZ33BA3

























































































Отзывы:

Нет отзывов