manualshive.com logo in svg

York YCAZ33BA3, Руководство пользователя, Страница: 25 / 88

Поделиться
Скачать
York YCAZ33BA3 Скачать руководство пользователя страница 25

FORM 150.44-NM4

25

YORK INTERNATIONAL

“DISPLAY” KEYS

26572A(D)

“DISPLAY”

KEYS

GENERAL

The DISPLAY keys allow the user to retrieve system

pressures, system motor currents, chilled liquid tem-

peratures, outdoor ambient temperature, compressor

running times, number of compressor starts, and op-

tion information on the chiller package. This data is

useful for monitoring chiller operation, diagnosing po-

tential future problems, troubleshooting, and commis-

sioning the chiller.

Displayed data will be real-time data displayed on a

“40” character display consisting of 2 lines of 20 char-

acters. The display will update all information at a rate

of about “2” seconds.

When a DISPLAY pushbutton is pressed, the corre-

sponding message will be displayed and will remain

on the display until another pushbutton is pressed.

Display Messages may show characters indicating

“greater than” (>) or “less than” (<). These characters

indicate the actual values are greater than or less than

the limit values which are being displayed.

If a message is required to be updated faster than ev-

ery 2 seconds, the appropriate key for the desired dis-

play may be pushed and held. Updating will be at .4

second intervals.

Each of the keys and an example of the typical corre-

sponding display messages will be discussed in the

text which follows.

Chilled Liquid Temps

A display indicating chiller leaving and return water tem-

perature is provided when this pushbutton is pressed.

The minimum limit on the display is “8.7 DEG F”. The

maximum limit on the display is “84.5 DEG F”.

Ambient Temp

The outdoor ambient temperature is displayed when

this pushbutton is pressed.

The minimum limit on the display is “0 DEG F”. The

maximum limit on the display is “133.8 DEG F”.

System 1 Pressures

Oil pressure, suction pressure, and discharge* pres-

sure on System 1 will be displayed when this

pushbutton is pressed.

CHILLED

LIQUID TEMPS

AMBIENT

TEMP

L W T

=

4 9 . 2

D E G F

R W T

=

5 2 . 0

D E G F

O U T S I D E

A M B I E N T

A I R

=

7 5 . 9

D E G F

SYSTEM 1

PRESSURES

*  Discharge Pressure Readout is an option. Without this option, the display will read a fixed value.

Содержание YCAZ33BA3

























































































Отзывы:

Нет отзывов