80
YORK INTERNATIONAL
FORM 150.52-NM2 (1001)
Technical Data
7-1/2"
CONTROL
OPENING
(9-1/2" HIGH)
2"
POWER
OPENING
(21" HIGH)
42"
30-3/4"
7-1/4"
VIEW C-C
12"
4-3/4"
2" TYP.
8-7/8"
28"
2"
CONTROL ENTRY
(12) 1/2"
CONDUIT K.O.'S
VIEW B-B
POWER OPENING
(7" WIDE X
21" TALL)
DO NOT USE
unless 2-compressor
unit with multiple
point power
VIEW A-A
91-3/8"
CONTROL
TRANSFORMER
SERVICE SWITCH
1-7/8" (EDGE OF
UNIT TO COOLER
CONNECTION)
C
17-1/4"
C
B
B
OPTIONS PANEL
MICRO-COMPUTER
CONTROL CENTER
SYS. #1
COILS
SYS. #2
COILS
DIMENSIONS – YCAR 0315SC – YCAR0415SC (ENGLISH)
LD03539
LD03540
NOTES:
1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance,
reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpre-
dictable air flow patterns and possible diminished performance. YORK's unit controls will optimize operation without nuisance high pres-
sure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center
assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control
panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher
than the unit.
(It is recommended that power wiring enters on the right side. If left entry is used,
be sure that space is available for large wire bending radius.)
