7
2. Attach the stabilisers
1. Attach the front and rear stabiliser to the main frame with the
bolts, curve washers, spring washers and cap nuts as shown.
2. Be sure to fit the parts in the same order as the diagram.
3. Attach the front post
Make sure the nuts & bolts are fully tightened with the
spanner provided
!
1. Slide the tension cable into the front post through the hole on the
post first as shown.
2. Fit the tension control into the square hole on the front post and
secure in position with flat head machine screw.
3. Turn the tension control to highest level to give maximum length to
cable for fitting front post. Hook the tension cables together as shown.
( You may have to pull firmly downwards on the upper cable to make it
fit underneath the bracket of the lower cable.)
4. Connect the computer wires as shown - make sure it’s fully connected!
5. Slide the front post into the front post mounting tube carefully.
6. Secure in place using 4x allen head bolts, spring washers and curve
washers as shown - be sure to fit them in the same order as the
diagram shown.
FIXINGS:
FIXINGS:
x 4
Part
No.
50
x 4
Part
No.
12
Take care to ensure
the computer wire
does not get trapped
when you attach the
front post !
!
x 4
Part
No.
11
FIXINGS:
FIXINGS:
x 4
Part
No.
10
x 4
Part
No.
11
x 4
Part
No.
12
x 4
Part
No.
14
Make sure the bolts
are fully tightened
with the allen key
provided.
!
65
66
12
11
50
computer
cable
2.
3.
67
68
tension cable
1.
Содержание eclipse dual action
Страница 1: ...owner s manual yorkfitness com 23 06 2008 eclipse dual action...
Страница 15: ...exploded diagram 15...