9
7. Attach the computer console
1. Insert 2x battery (AA size 1.5V) into the
compartment in the back of the compu-
ter console.
2. Connect the computer wires together as
shown - make sure it’s fully connected.
3. Attach the console onto the bracket
and secure, using 4x machine screws as
shown. ( Screws are located in the back
of the console).
FIXINGS:
FIXINGS:
x 4
Part
No.
72
FIXINGS:
6. Attach the handlebar posts
1. Slide the left and right top handlebar posts over the pivot rod from both
ends correspondingly with the plastic spacers and flat washers as shown.
2. Secure in place using the allen head bolts, spring washers and flat washers as
shown.
3. Slide the low handlebar posts into the top handlebar posts and secure, using
4x hex head bolts, curve washers, spring washers and cap nuts.
4. Attach the pedal posts to the low handlebar posts and secure, using 2 x allen
head bolts and nylon locknuts as shown.
5. Be sure to fit the parts in the same order as the diagrams shown.
FIXINGS:
FIXINGS:
x 2
Part
No.
44
x 2
Part
No.
12
x 2
Part
No.
51
x 2
Part
No.
39
x 4
Part
No.
53
x 2
Part
No.
54
x 2
Part
No.
52
FIXINGS:
Final Checks
Your X-Trainer is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts / nuts are fully tightened.
•
Make sure you have positioned it on a flat, level surface.
Make sure the nuts & bolts
are fully tightened with the
spanner & allen key provided.
!
Take care to ensure the computer wire does
not get trapped when you attach the console
!
x 2
Part
No.
45
x 2
Part
No.
55
x 2
Part
No.
58
x 2
Part
No.
79
Содержание eclipse dual action
Страница 1: ...owner s manual yorkfitness com 23 06 2008 eclipse dual action...
Страница 15: ...exploded diagram 15...