![background image](http://html1.mh-extra.com/html/yokogawa/wt310eh/wt310eh_user-manual_4138883071.webp)
6-31
IM WT310E-17EN
Commands
1
2
3
4
5
6
7
8
9
App
Index
:STATus?
Function
Queries all the settings for the communication
status feature.
Syntax
:STATus?
:STATus:CONDition?
Function
Queries the contents of the
condition register.
Syntax
:STATus:CONDition?
Example
:STATUS:CONDITION? -> 16
Description For information about the condition register, see
chapter 7, “Status Reports.”
:STATus:EESE
Function
Sets or queries the
extended event enable
register.
Syntax
:STATus:EESE <Register>
:STATus:EESE?
<Register>
=
0
to
65535
Example
:STATUS:EESE #B0000000000000000
:STATus:EESE?
-> :STATUS:EESE 0
Description For information about the extended event enable
register, see chapter 7, “Status Reports.”
:STATus:EESR?
Function
Queries the contents of the
extended event
register and clears the register.
Syntax
:STATus:EESR?
Example
:STATUS:EESR? -> 0
Description For information about the extended event register,
see chapter 7, “Status Reports.”
:STATus:ERRor?
Function
Queries the error code and message of the last
error that has occurred (top of the error queue).
Syntax
:STATus:ERRor?
Example
:STATUS:ERROR?
-> 113,"Underfined Header"
Description • If no errors have occurred, 0,”No error” is
returned.
• You can use the :STATus:QMESsage
command to specify whether the message is
included.
:STATus:FILTer<x>
Function
Sets or queries the
transition filter.
Syntax
:STATus:FILTer<x> {RISE|FALL|BOTH|
NEVer}
:STATus:FILTer<x>?
<x> = 1 to 16
Example
:STATUS:FILTER2 RISE
:STATus:FILTER2?
-> :STATUS:FILTER2 RISE
Description • Set how each bit in the condition register must
change to trigger the setting of an event. If a
bit is set to RISE, an event is set when the bit
changes from 0 to 1.
• For information about the transition filter, see
chapter 7, “Status Reports.”
:STATus:QENable
Function
Sets or queries whether messages other than
errors will be stored to the error queue (ON) or
not (OFF).
Syntax
:STATus:QENable {<Boolean>}
:STATus:QENable?
Example
:STATUS:QENABLE ON
:STATus:QENABLE?
-> :STATus:QENABLE 1
:STATus:QMESsage
Function
Sets or queries whether message information
will be attached to the response to the STATus:
ERRor? query (ON/OFF).
Syntax
:STATus:QMESsage {<Boolean>}
:STATus:QMESsage?
Example
:STATUS:QMESSAGE ON
:STATus:QMESSAGE?
-> :STATus:QMESSAGE 1
:STATus:SPOLl?
Function Executes
serial polling.
Syntax
:STATus:SPOLl?
Example
:STATUS:SPOLL? -> :STATUS:SPOLL 0
6.14 STATus group
The commands in this group are used to make settings and queries related to the status report. There are no front
panel keys that correspond to the commands in this group. For information about status reports, see chapter 7.