YOKOGAWA WT310EH Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 104

YOKOGAWA WT310EH Скачать руководство пользователя страница 41

6-1

IM WT310E-17EN

Commands

Chapter 6

Commands

1

2

3

4

5

6

7

8

9

App

Index

6.1

List of Commands

Command

Function

Page

AOUTput Group

Queries all D/A output settings.

:AOUTput[:NORMal]:PRESet

Sets the D/A output items to their default values.

:AOUTput[:NORMal]:CHANnel<x>

Sets or queries a D/A output item (function or element).

:AOUTput[:NORMal]:IRTime

Sets or queries the rated integration time that is used in the D/A output of the

integrated value.

:AOUTput[:NORMal]:MODE<x>

Sets or queries a D/A range mode.

:AOUTput[:NORMal]:RATE<x>

Sets or queries the maximum and minimum values for when the D/A output

is in manual range mode. Sets or queries the comparison upper and lower

limits for when the D/A output is in comparator mode.

COMMunicate group

Queries all communication settings.

:COMMunicate:HEADer

Sets or queries whether headers are attached to query responses.

:COMMunicate:LOCKout

Sets/clears local lockout.

:COMMunicate:REMote

Sets this instrument to remote or local mode. ON is remote mode.

:COMMunicate:STATus?

Queries the line-specific status.

:COMMunicate:VERBose

Sets or queries whether the response to a query is returned fully spelled out

or in its abbreviated form.

:COMMunicate:WAIT

Waits for a specified extended event to occur.

:COMMunicate:WAIT?

Creates the response that is returned when a specified extended event
occurs.

DISPlay group

Queries all display settings.

:DISPlay:NORMal?

Queries all normal measurement data display settings.

:DISPlay[:NORMal]:ITEM<x>

Sets or queries a normal measurement data display item.

:DISPlay:HARMonics?

Queries all harmonic measurement data display settings.

:DISPlay:HARMonics:ITEM<x>

Sets or queries a harmonic measurement data display item.

HARMonics Group

Queries all harmonic measurement settings.

:HARMonics:PLLSource

Sets or queries the PLL source.

:HARMonics:ORDer

Sets or queries the maximum and minimum harmonic orders that are

Sets or queries the equation used to compute the THD (total harmonic

:HARMonics:DISPlay?

Queries all harmonic measurement display settings.

:HARMonics:DISPlay[:STATe]

Sets or queries the on/off state of harmonic measurement data display.

:HARMonics:DISPlay:ORDer

Sets or queries the harmonic order of the harmonic component that is shown

in display B for the harmonic measurement data display.

Sets or queries the on/off state of the output hold feature for display,

communication, and other types of data.

INPut Group

Queries all input settings.

[:INPut]:CFACtor

Sets or queries the crest factor.

[:INPut]:WIRing

Sets or queries the wiring system.

Sets or queries the voltage and current measurement mode.

[:INPut]:VOLTage?

Queries all voltage measurement settings.

[:INPut]:VOLTage:RANGe

Sets or queries the voltage range.

[:INPut]:VOLTage:AUTO

Sets or queries the voltage auto range on/off state.

[:INPut]:VOLTage:CONFig

Sets or queries the valid voltage range.

«
...
39
40
41
42
43
...
»

Содержание WT310EH









































































































Отзывы:

Нет отзывов