5-4
IM WT3001E-51EN
• Turning ON the DNS
16.
Press the
cursor keys
to select DNS.
17.
Press
SET
. A DNS selection box appears.
18.
Press the
cursor keys
to select ON.
19.
Press
SET
to confirm the DNS ON setting.
• Entering the Domain Name
Enter the domain name of the system or network to which this instrument belongs.
20.
Press the
cursor keys
to select Domain Name.
21.
Press
SET
. A keyboard appears.
22.
Use the
keyboard
to enter the domain name of the network to which this
instrument belongs.
For keyboard operations, see section 3.14 in the
User’s Manual IM WT3001E-01EN
.
• Entering the Address of the Primary DNS Server
23.
Press the
cursor keys
to select DNS Server1.
24.
Enter all four octets of the primary DNS server address in the same fashion as the
IP address.
• Entering the Address of the Secondary DNS Server
Enter the information if the system or network to which this instrument belongs uses
a secondary DNS server. If a secondary server is not used, proceed to “Entering the
Primary Domain Suffix.”
25.
Press the
cursor keys
to select DNS Server2.
26.
Enter all four octets of the secondary DNS server address in the same fashion as
the IP address.
• Entering the Primary Domain Suffix
Enter the information if a domain suffix is required.
27.
Press the
cursor keys
to select Domain Suffix1.
28.
Enter the primary domain suffix in the same fashion as the domain name.
• Entering the Secondary Domain Suffix
Enter the information if a secondary domain suffix is present.
29.
Press the
cursor keys
to select Domain Suffix2.
30.
Enter the secondary domain suffix in the same fashion as the domain name.
5.2 Setting TCP/IP
