10-3
IM WT3001E-51EN
W
aveform Computation (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
10.2 Various Settings Related to Waveform
Computation
A portion of the settings related to waveform computation is common with the “waveform
display in normal measurement mode” and “FFT mode.” The settings described in
sections 10.3 to 10.5 are those specific to waveform computation. Set these items first.
• Selecting the waveform computation mode
Section 10.3
• Setting the waveform equation
Section 10.4
• Setting the scale, unit, and label of the computed waveform Section 10.5
The settings below are common with the waveform display of normal measurement
mode. See the respective sections below in the
User’s Manual IM WT3001E-01EN
.
• Selecting the waveform to be displayed
Section 6.2
• Setting the time axis
Section 6.3
• Setting the trigger
Section 6.4
• Zooming vertically and moving the vertical position
Section 6.5
• Waveform display on divided windows
Section 6.6
• Selecting the display interpolation and graticule
Section 6.7
• Turning ON/OFF the scale value and waveform label
Section 6.8
• Cursor measurement
Section 6.9
If you change settings that are common with the “waveform display in normal measurement
mode” and “FFT mode” in waveform computation mode, the waveform display settings
in normal measurement mode and FFT mode are also changed. For example, if you
change the time axis to 20 ms/division in waveform computation mode, the time axis of
the waveform display in normal measurement mode is also changed to 20 ms/division.
