YOKOGAWA SC72 Скачать руководство пользователя страница 28

Страница: 28 / 62

IM 12D03D02-01E

4-1

Keypad and Display Functions

4. Keypad and Display Functions

There are seven membrane keys on the keyboard of the Personal Conductivity meter.

The following key functions are provided.

• Display the conductivity, measured temperature and temperature coefficient.

•  Display the conductivity, date and time.
•  Hold conductivity and temperature measurements.
•  Store conductivity and temperature measured data.
•  Other functions such as parameter setting.

POWER

Auto Power Off

HOLD

F/ENT

MEAS

DATA

When meter is OFF, press for at

least 1 sec. to turn on power.

When meter is ON, press for

about 2 sec. to turn off the power.

Automatic Power OFF function

default: 20 min. inactivity.

Press to start

measurement mode.

If already in MEAS

mode, it switches the

display panel.

Change set value.

If pressed while in

MEAS mode, switches

to function mode. Also

used to enter set

value.

If you press this key during

measurement, mark is

displayed, and present measured

values are held. To cancel, press

or keys.
If pressed during measurement,

mark flashes.

Press key to store measured

values in memory.

To abort data storage and return to
MEAS mode, press or key

again while mark is flashing.

MEAS

F/ENT

HOLD

DATA

4.1 Keypad Functions

POWER

: Power On/Off key

Pressing and holding this key for at least one second when nothing is displayed on

the LCD, will turn the meter on. The meter will be turned off by pressing and holding

this key for at least two seconds when the meter is on. If no keys are pressed for a

preset time, the meter turns off power automatically (refer to Section 4.3 (10), “Set

Auto Power Off time (A.oFF) panel”).

HOLD

: HOLD key

When pressed during measurement,

mark turns on and the currently

displayed measured conductivity value and temperature are held. Pressing

HOLD

MEAS

key will turn

mark off and return the meter to measurement mode.

Содержание SC72































































Результаты поиска

Содержание SC72

Отзывы:

Похожие инструкции для SC72

Бренды по названию

Популярные бренды

YOKOGAWA SC72, Руководство пользователя

Результаты поиска

Содержание SC72

Отзывы:

Похожие инструкции для SC72

Бренды по названию

Популярные бренды