YOKOGAWA SC72, Руководство пользователя

Страница: 26 / 62

IM 12D03D02-01E
3-3
3 . Measurement
3.4 Saving a Measured Value
There are two ways to save a measured value: holding temporarily and storing as a
record in nonvolatile memory. Measured values stored in nonvolatile memory are not
deleted even by replacing the batteries.
(1) HOLD
If
HOLD
key is pressed during measurement, the currently measured value is held
temporarily and the displayed value no longer changes. Press
HOLD
or
MEAS
key
to return to the measurement mode.
or
HOLD
HOLD
MEAS
(2) Data storage
If the
DATA
key is pressed during measurement, mark starts flashing.
Press the
F/ENT
key, then currently measured data can be stored in nonvolatile
memory. Data stored are measured conductivity, measured temperature, date and
time. Up to 300 data including individually deleted data can be stored. If you attempt
to store more data, will be displayed.
If is displayed before the data number has reached 300, run defrag
referring to Section 4.3 (15), “Defrag memory (dFLG) panel.” This will free up memory
occupied by deleted data, allowing data to be stored newly. To check stored data,
refer to Section 4.3 (1), “Display stored data (dAt) panel.”
Pressing DATA or
MEAS
key while mark is flashing cancels data storage
and returns the meter to measurement mode.
Abort data storage.
Execute data storage.
Press key to store data while is flashing.
While is flashing, press
or keys to abort data storage.
F/ENT
MEAS
DATA
DATA