manualshive.com logo in svg

YOKOGAWA PX8000, Руководство пользователя

Скачайте бесплатное руководство пользователя для продукта YOKOGAWA PX8000 на manualshive.com. В этом руководстве есть все необходимые инструкции для использования этого устройства. Не теряйте время - скачайте его сейчас!

Поделиться
Скачать
background image

22-3

IM PX8000-02EN

USB Storage Device

 CAUTION

•  Do not remove the USB storage device or turn off the power when the device is being 

accessed. If you do so, the data on the USB storage device may be corrupted.

•  An icon   centered at the top of the screen indicates when the USB storage medium is 

being accessed.

French

 ATTENTION

•  Pendant que le dispositif accède au support de stockage USB, ne retirez pas ce dernier et 

ne mettez pas l’alimentation hors tension. Vous risqueriez d’endommager les données sur 
le support de stockage USB.

•  Une icône   au centre de la partie supérieure de l’écran indique que le dispositif est en 

train d’accéder au support de stockage USB.

Compatible USB Storage Devices

You can use USB storage devices that are compatible with USB Mass Storage Class version 1.1.

Note

•  Only connect a USB keyboard, mouse, printer, or storage device to the USB connector for peripherals.
•  The PX8000 can handle up to four storage devices. If the connected device is partitioned, the PX8000 

treats each partition as a separate storage device.

•  Connect USB storages device directly, not through a USB hub.
•  Do not connect and disconnect the two USB devices repetitively. Provide a 10-second interval between 

removal and connection.

How to Connect a USB Storage Device

When connecting a USB storage device to the PX8000 USB port, connect the USB cable directly as 
shown in the figure below. You can connect/disconnect a USB cable at any time regardless of whether 
the PX8000 is on or off (hot-plugging is supported). Connect the type A connector of the USB cable to 
the PX8000, and connect the type B connector to the USB storage device. If you connect a USB storage 
device when the power switch is on, the device becomes available for use after the PX8000 identifies it.
The PX8000 has two USB ports: USB-0 and USB-1. The port numbers are not fixed. The port at which 
the first USB storage device is detected becomes USB-0. The second detected USB storage device 
becomes USB-1.

 

PX8000

USB

storage

USB cable

USB port

(type A connector)

There are two ports.

USB port

(type B connector)

General USB Storage Device Handling Precautions

Follow the general handling precautions that are provided with your USB storage device.

22.1  Connecting Storage Media

Содержание PX8000











































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PX8000

Radio Shack TRS-80 Owner'S Manual preview
TRS-80
Бренд: Radio Shack Страницы: 44
Radiodetection RD8100 Quick Locating Manual preview
RD8100
Бренд: Radiodetection Страницы: 2
Saluki S3602 Series User Manual preview
S3602 Series
Бренд: Saluki Страницы: 312
Datakom DV-0101 Quick Start Manual preview
DV-0101
Бренд: Datakom Страницы: 2
CAS Corporation TW-100 Service Manual preview
TW-100
Бренд: CAS Corporation Страницы: 20
Kawai CP67 Owner'S Manual preview
CP67
Бренд: Kawai Страницы: 36
PCE Health and Fitness CT 26FN User Manual preview
CT 26FN
Бренд: PCE Health and Fitness Страницы: 11
Maico HY 5 Mounting Instructions And Directions For Use preview
HY 5
Бренд: Maico Страницы: 2
J&D Electronics Multi-GEM 12 User Manual preview
Multi-GEM 12
Бренд: J&D Electronics Страницы: 2
S+S Regeltechnik RHEASREG KLSW-3 Operating Instructions, Mounting & Installation preview
RHEASREG KLSW-3
Бренд: S+S Regeltechnik Страницы: 32
Chauvin Arnoux AEMC 2139.61 User Manual preview
AEMC 2139.61
Бренд: Chauvin Arnoux Страницы: 64
S+S Regeltechnik 1101-3121-0049-800 Operating Instructions, Mounting & Installation preview
1101-3121-0049-800
Бренд: S+S Regeltechnik Страницы: 16
L.R. Baggs M1 ACTIVE Installation Manual & Users Manual preview
M1 ACTIVE
Бренд: L.R. Baggs Страницы: 6
Princeton Instruments HRS-300 Operating Instructions Manual preview
HRS-300
Бренд: Princeton Instruments Страницы: 28
YATO YT-73129 Manual preview
YT-73129
Бренд: YATO Страницы: 52
Heyl Testomat EVO Quick Start Manual preview
Testomat EVO
Бренд: Heyl Страницы: 2
Zenner zelsius C5 -IUF Installation And Operating Instructions Manual preview
zelsius C5 -IUF
Бренд: Zenner Страницы: 28
R&S RT-Z User Manual preview
RT-Z
Бренд: R&S Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды