Storing and Recalling Data (MT220 Only)
43
IM 767361-01E
Storing and Recalling Data (MT220 Only)
Storing Data
Acquired data is assigned a specific memory number and then stored in the
internal memory.
1 to 9999 can be set as the data number (memory number). If no destination
memory number is specified, data will be stored under consecutive memory
numbers (default starting number is 1). When a memory number is specified,
data is saved successively starting with that number.
Two types of storage methods are available, auto store and manual store.
Data acquisition interval
(number of samples taken per stored data item): 1, 4, 16, 64, 512
No. of storage times:
1 to 2000
Destination memory No.:
1 to 9999
No. of data which can be stored:
2000
Auto Store
Data is stored automatically the specified number of times and at the specified
interval. If no destination memory number is specified, storage starts from the
memory number after the one in which last data item was stored.
Making Auto Store Settings
1.
Press
MENU
.
2.
Keep pressing or until
is displayed in the screen, then press
ENTER/LOCAL
to proceed to the store mode setting screen.
3.
Press or to display
, then press
ENTER/LOCAL
to select the mode.
4.
In the store rate setting screen (
), use and to select the desired
acquisition interval, then press
ENTER/LOCAL
.
5.
In the screen to set the number of data (
), use , and to set the
number of data to be stored, then press
ENTER/LOCAL
.
6.
To return to the normal measurement screen, press
MENU
.
Setting the Memory Number at Which Storage Is to Be Started
7.
Press No. to display the memory number setting screen (
).
8.
Use , and to set the desired memory number, then press
ENTER/LOCAL
.
Storing Data
9.
Pressing
STORE
automatically stores data items one by one. The current memory
number to which data is being stored is displayed for approximately 0.5 seconds
in the upper part of the screen.
Data automatically ceases to be stored when the stored number of data reaches
the specified maximum number. Then
is displayed in the upper part
of the screen and
in the lower part of the screen for approximately 0.5
seconds.
Stopping Auto Store
10.
Press
STORE
again. Auto store stops.
is displayed in the upper part
of the screen and
in the lower part of the screen for approximately 0.5
seconds.
Note
The store mode, store rate, and allowed number of stores cannot be changed during auto store.
