Storing and Recalling Data (MT220 Only)
45
IM 767361-01E
Recalling Data by Specifying the Corresponding Memory Number
2.
Press
No.
while recall mode is active.
3.
Use , , or to select the desired memory number.
4.
Press
ENTER/LOCAL
to recall the data.
5.
To cancel recall mode, press
RECALL
again. RECALL disappears from the
screen.
Note
• If recall is performed from a memory number in which no data has been stored, error code
will be displayed, and the
screen will appear.
• If the desired data is relative display data, it cannot be recalled if % display or %ERROR
display is active. In this case, display is switched automatically to the normal display screen.
Deleting Data
Data stored in the internal memory can be deleted. Two methods are available;
one is used to delete the desired data by specifying the corresponding memory
number and the other is used to delete all data at once.
1.
Press the
DELETE
.
2.
Press or to select
(partial delete) or (delete all data),
then
press
ENTER/LOCAL
.
3.
If
is selected, specify the delete start and stop memory numbers.
If is selected, skip to step 4.
Delete start memory Number setting screen:
Delete stop memory Number setting screen:
Use , , and to set both the start and stop memory numbers, then press
ENTER/LOCAL
.
4.
In the delete execution setting screen, select
if you want to delete the data
or
if you do not, then press
ENTER/LOCAL
. Press DELETE to return to the
normal measurement screen.
Displaying the Number of Data Items Which Can Be Stored
The possible number of data to be stored can be displayed.
1.
Press
MENU
.
2.
Keep pressing or until
is displayed, then press
ENTER/LOCAL
.
3.
The number of data items which can be stored is displayed for approximately one
second.
4.
To return to the normal measurement screen, press
MENU
.
Storing and Recalling Data (MT220 Only)
