2-13
IM XL100C-E
Ethernet Interface
1
2
3
4
5
6
7
App
Index
2.7
Setting the Login of Ethernet Communications
By setting these functions, you can prohibit access to the XL100 by third parties from the
network, authorize setup operations of the XL100 via the Ethernet network, and
disconnect connections if there is no data transmission for a given time. To use this
function, however, the Ethernet interface must be configured as described in section 2.3.
Registering Users
• Selecting the User Level
Select either user level, administrator or user.
• Administrator
One administrator can be registered. The administrator has the privileges to use
all the functions of the setting/measurement server, maintenance/test server,
and FTP server.
• User
Certain limitations exist in using the setting/measurement server, maintenance/
test server, and FTP server.
• Limitations on the use of the setting/measurement server
Users are not authorized to change the settings that would change the
operation of the XL100. Users can output measured and setting data.
• Limitations on the use of the maintenance/test server
A user cannot disconnect a connection between another PC and the XL100.
A user can disconnect the connection between the PC that the user is using
and the XL100.
• Limitations on the use of the FTP server
A user cannot save files to the external storage medium of the XL100 or
delete files on it. A user can load files.
• Selecting Whether to Register (ON/OFF) Users
• ON
Registers users. You can set the user name and password for logging in.
• OFF
Not register users.
• Setting the User Name
• Enter the user name using up to 16 alphanumeric characters.
• You cannot register the same user names.
• Since the word “quit” is reserved as a command on the XL100, the user name
“quit” is not allowed.
• Only the administrator is valid for the FTP server function. Login is not possible
even if a user is registered with administrator privileges.
• Setting the Password
Set the password using up to six alphanumeric characters.
