5-36
IM XL100C-E
XG
Sets the time zone
Syntax
XG p1,p2<terminator>
p1
Offset time from the Greenwich Mean Time
-1200
to
1300
Upper two digits (hour):
-12
to
13
Lower 2 digits (minute):
00
to
59
(See appendix 4, “Time Zones” and the XG
command parameters.)
p2
Region number of the corresponding offset
time zone
0
to
5
(See appendix 4, “Time Zones” and the XG
command parameters.)
Example
Set the time zone to “Osaka, Sapporo, Tokyo” (9
hour offset from Greenwich Mean Time and
region number to 2).
XG 0900,2
XW
Sets the ID number
Syntax
XW p1<terminator>
p1
ID number
1
to
99
Query
XW?
Example
Set the ID number to 10.
XW 10
Description • The ID number corresponds to the hardware
ID number.
• In order to activate the settings that are
changed using the basic setting commands,
the settings must be saved using the XE
command. If you do not, the settings before
the change are activated if logging is started.
XY
Sets the statistical calculation
Syntax
XY p1,p2,p3,p4,p5<terminator>
p1
Calculation of the maximum value
Enable:
ON
Disable:
OFF
p2
Calculation of the minimum value
Enable:
ON
Disable:
OFF
p3
Calculation of the average value
Enable:
ON
Disable:
OFF
p4
Calculation of the peak (P-P) value
Enable:
ON
Disable:
OFF
p5
Calculation of the rms value
Enable:
ON
Disable:
OFF
Query
XY?
YA
Sets the IP address, subnet
mask, default gateway, and
DHCP function
Syntax
YA p1,p2,p3,p4<terminator>
p1
IP address
0.0.0.0
to
255.255.255.255
p2
Subnet mask
0.0.0.0
to
255.255.255.255
p3
Default gateway
0.0.0.0
to
255.255.255.255
p4
DHCP function enable/disable Disable
OFF
Query
YA?
Example
Set the IP address to 192.168.111.24, the subnet
mask to 255.255.255.0, and the default gateway
to 192.168.111.1 without using the DHCP
function.
YA 192.168.111.24,255.255.255.0,
192.168.111.1,OFF
Description The settings changed with this command are
applied when they are saved using the XE
command.
When using the DHCP (automatic IP address
assignment) function
Syntax
YA p1,p2,p3,p4<<terminator>
p1
IP address
0.0.0.0
to
255.255.255.255
p2
Subnet mask
0.0.0.0
to
255.255.255.255
p3
Default gateway
0.0.0.0
to
255.255.255.255
p4
DHCP function enable/disable Enable
ON
Query
YA?
Example
Use the DHCP function.
YA ,,,ON
Description • If p4 is set to ON, p1, p2, and p3 are invalid.
• The settings changed with this command are
applied when they are saved using the XE
command.
YD
Sets the Ethernet login function.
Syntax
YD p1<terminator>
p1
Ethernet login function setting
ON:
ON
OFF: OFF
Query
YD?
Example
Turns the Ethernet login function ON.
YD ON
Description The setting changed with this command is
applied when it is saved using the XE command.
YK
Sets the keepalive
Syntax
YK p1<terminator>
p1
Enable/Disable keepalive
Enable:
ON
Disable:
OFF
Query
YK?
Example
Disable keepalive.
YK OFF
Description
The setting changed with this
command is applied when it is saved using the
XE command.
5.7 Basic Setting Commands
